Answer
Oct 21, 2021 - 11:58 PM
Hi there!
These Opels have a few possible failure points that could lead to such symptoms. The first is a vacuum leak, most likely on the vacuum hose leading to the MAP (pressure) sensor (a grey or green box, mounted on the firewall, with one rubber hose leading from the intake manifold and a green or black connector with 3 wiring pins). If this hose perishes (as is likely at your car's age), it could introduce excess air into the engine, leading to elevated idle speed, so this would be the first thing to check.
Next up would be the engine's coolant temperature sensor (mounted either on the cylinder head or in the top radiator hose, above the gearbox), although it sounds like this may have already been attended-to. If this sensor malfunctions, the car will "see" cold temperatures and increase the idle speed, and this is quite a common failure point. Check it out with a multimeter at various engine temperatures after unplugging the grey 2-wire connector - its resistance will behigher with a cold engine, and then gradually drop as the engine warms up.
Finally, and this is also an extremely common issue on these cars, the idle control valve may be sticky. This unit is mounted on top of the throttle body, and is designed to allow more air into the engine when cold. But, with time and use, the plunger which opens up to regulate the extra airflow could get stuck with oily residue, which usually leads to erratic idle behaviour either when cold or warm (or both). Remove the wiring connector that plugs into the idle control valve, undo the two screws, and then clean it properly with carb cleaner (found at spares shops in a can), as well as the air channels around it. If this makes an improvement but doesn't completely solve the problem, the idle control valve itself is on the way out, and should be replaced.
On a different topic: Did your mechanic replace the cambelt tensioner, the cambelt's main sprocket, and the big bolt on the crankshaft when they replaced the cam belt itself? Those three items MUST be replaced at the same time along with the belt, and many mechanics neglect to do this (either through ignorance or to save money), which will inevitably lead to a damaged crank and even an expensive engine rebuild down the line (depending on which one fails first). If not, return the car to the mechanic ASAP to have those items replaced as well.
Hope this helps!
The AskAutoTrader Team


Add New Comment