Answer
May 01, 2019 - 09:34 PM
Hi there
The zero reading from the downstream lambda sensor might indeed be the reason for your car's poor consumption and driveability issues. This error could point in a few directions, but these two are most likely: the catalyst may be blocked, leading to a reduction in performance and causing the engine's control system to go into a "safe mode"; or the sensor itself could be defective (or not getting a strong power supply through a poor earth or 12V connection), which could lead the engine management to again go into a lean-running "safe mode" in an effort to limit emissions or prevent catalyst damage.
You may also want to check for vacuum leaks on the intake manifold or elsewhere in the air intake system (specifically between the air mass meter (MAF) and the throttle body, as any leaks in this area will cause a lean-running condition under part load, which may push the engine's control system outside of its normal operating boundaries. This is less likely, given the diagnostic information you supplied, however.
If you have access to the engine scanner (OBD2 tool), you could also check the long- and short-term fuel trims - let us know what those values are like at idle as well as at 3000 r/min, and we could try to interpret them as a other possible pointers towards your problem.
Hope this helps!
The AskAutoTrader Team


Add New Comment